Blog
News
Downloads
Links
FAQ
Guestbook
Forums
standing rigging
Gréement dormant d'un Amphitrite 43 (sorti du chantier en juin 1982)
Ridoir en inox massif habituel chez W
Grand mât (10 câbles)
- Etai monotoron = 16 m x 12 mm
- Pataras monotoron = 9.1 m x 10 mm
- Patte d'oie monotoron = 7.3 m x 2 x 8 mm
- Galhaubans monotoron = 15.1 m x 2 x 10 mm
- Bas-haubans avant monotoron = 7.8 m x 2 x 8 mm
- Bas-haubans arrière monotoron = 8 m x 2 x 8 mm
Mât d'artimon (6 câbles)
- Galhaubans monotoron = 9.4 m x 2 x 6 mm
- Bas-haubans avant monotoron = 5.6 m x 2 x 6 mm
- Bas-haubans arrière (bastaques) monotoron = 9 m x 2 x 6 mm
Autres
- Etai largable monotoron = 12 m x 8 mm (selon emplacement)
- Marocain monotoron = approximativement 7 m x 6/8 mm
N.B. Ces chiffres sont suffisants pour bâtir un devis, mais il est à peu près certain 1. qu'entre 1975 et 1990 le gréement dormant des Amphitrites a évolué 2. que les réglages, la hauteur des ridoirs, des chapes et des emplantures sur le mât peuvent différer d'un bateau à l'autre ; donc, il faut de toute façon en passer par un mesurage précis des câbles avant de passer commande.
Photos et article de Mindelo
Creation date : 28/12/2009 > 13:14
Last update : 21/12/2010 > 12:32
Category : Rigging
Page read 11149 times
Document generated in 0.03 second